- Two post lifts
- Four post lifts
- Scissor lifts
- Commercial vehicle lifts
- VOSA approved MoT equipment
- Roller brake testers
- Commercial Roller brake testers
- Jacking beams
- Tyre changers
- Wheel balancer
Bradbury looks
to the future with a four-post lift equipped with play detector tester
and wheel radius plates. Making sure Bradbury is able to supply the correct
test equipment for the modern workshop. We have designed a new lift to
meet the possible needs of MoT test stations.
This powerful unit complete with mobile operated inspection lamp allows full testing of suspension and steering ball joints, highlighting wear, without the need to jack the vehicle.
The radius plates allow the wheels to be turned easily to allow examination of brake pipes and pads. As the radius plates are level with the platform the headlamps can be tested without moving the vehicle, if the lift is used as the level test area.
This powerful unit complete with mobile operated inspection lamp allows full testing of suspension and steering ball joints, highlighting wear, without the need to jack the vehicle.
The radius plates allow the wheels to be turned easily to allow examination of brake pipes and pads. As the radius plates are level with the platform the headlamps can be tested without moving the vehicle, if the lift is used as the level test area.
WC5201 Fully automatic
tyre changer
The automatic tyre changer gives the professional tyre shop a truly, heavy duty machine that is designed to stand up to continuous intensive use, day after day, week-in week-out for years.
Features:
Tilt column action. Capacity 0”-20” wheels clamped on the outside. 12”-23” clamped on the inside. Standard fitting includes Air filter / regulator / oiler and tyre inflator with pressure gauge.
Accessories:
Tyre lever, alloy wheel protection kit and soap bucket.
Standard 240 Volt 1 phase. Operating pressure 8-10 bar (116-145psi). Delivery, installation and basic training included.
The automatic tyre changer gives the professional tyre shop a truly, heavy duty machine that is designed to stand up to continuous intensive use, day after day, week-in week-out for years.
Features:
Tilt column action. Capacity 0”-20” wheels clamped on the outside. 12”-23” clamped on the inside. Standard fitting includes Air filter / regulator / oiler and tyre inflator with pressure gauge.
Accessories:
Tyre lever, alloy wheel protection kit and soap bucket.
Standard 240 Volt 1 phase. Operating pressure 8-10 bar (116-145psi). Delivery, installation and basic training included.
WC5201AA Fully automatic tyre changer with assist
arm. The addition of the assist arm to the automatic tyre changer
allows the professional tyre shop to make easy work of changing low profile
tyres.
Features:
Operating Pressure 8-10 bar (116-145 psi)
Delivery, installation and basic training included.
WC5501
Electronic wheel balancer
The electronic computerised wheel balancer is a motorised machine designed for the budget tyre shop and service workshop. Delivery, installation and basic training included. Technical data.
Features:
Alloy wheel program, self calibrating, max wheel weight 70Kg, rim diameter 10”-24”, rim width 2”-20”, max wheel diameter 900mm, precision to 1 gramme, balancing time 10 seconds, 240 volt 1 phase.
Accessories:
Rim width measuring caliper, wheel weight pliers / hammer, 3 x standard cones (other cones / adaptors available)
WC5401 Laser four wheel aligner
The laser four wheel aligner is available trolley mounted, or in a space saving budget wall mounted version. Designed to allow the busy tyre shop or service work-shop to quickly measure and adjust the most common steering angles.
Features:
Measuring head fits from 12” to 22” wheel sizes, fixed laser inside each measuring head, four laser system with a unique design inside the measuring head, unique fitting to road wheel, rechargeable battery system, independent charging system, illuminated display panel, commitment to service, British made, peace of mind with a 12 month warranty.
The electronic computerised wheel balancer is a motorised machine designed for the budget tyre shop and service workshop. Delivery, installation and basic training included. Technical data.
Features:
Alloy wheel program, self calibrating, max wheel weight 70Kg, rim diameter 10”-24”, rim width 2”-20”, max wheel diameter 900mm, precision to 1 gramme, balancing time 10 seconds, 240 volt 1 phase.
Accessories:
Rim width measuring caliper, wheel weight pliers / hammer, 3 x standard cones (other cones / adaptors available)
WC5401 Laser four wheel aligner
The laser four wheel aligner is available trolley mounted, or in a space saving budget wall mounted version. Designed to allow the busy tyre shop or service work-shop to quickly measure and adjust the most common steering angles.
Features:
Measuring head fits from 12” to 22” wheel sizes, fixed laser inside each measuring head, four laser system with a unique design inside the measuring head, unique fitting to road wheel, rechargeable battery system, independent charging system, illuminated display panel, commitment to service, British made, peace of mind with a 12 month warranty.