About Quotation Request

This quotation service is provided to assist in the planning of your marble or granite application. Please read an instruction below and go to "Online Quotation" to fill up the form and send to us by pressing the "Submit" button.

You will need to tell us which features you want on your worktops. The diagram shows some typical features for a kitchen worktop. If there is something else you want which is not shown let us know and we will be happy to quote you for it, just give us a call if in doubt.

Informations & Features We need from you:

• Make sure you put all your contact details on the sheet. We will then give you a quote by return. We need to know if you are the company (contractor) or end user.
• If a kitchen company or bathroom company are fitting your units, please tell us which one.
• Job Location (city and state)
• Job Location Floor - Level or Stairs (groundfloor, 1st floor, 2nd floor etc.)
• Roughly sketch the worktop you want us to quote, with dimensions (in mm), and send, e-mail or, preferably, fax it to us. Please see a sample drawing.
• Please make sure that you show which edges need to be polished, and give details of any upstands, splashbacks, hobs etc.
• The location of any sinks and what type they are (top-mount or undermount)
• For sinks, the choice is Belfast or Butler, Undermounted and standard Inset
• With Belfast, Butler or Undermounted you have the choice of having a set of drainer grooves and/or a recessed drainer area.
• Drainage grooves set has usually 5 grooves at a length of 450mm on either one or both sides of the sink.
• Undermounted bowls are best supported in the units themselves using an MDF sub-base.
• What type of material you would like to use (granite, marble, etc.)
• What color of stone (For some examples of colors click here: Material Gallery)
• What edge detail (to choose edge detail click here: Information Page)
• The location and size (height) of any backsplashes (if applicable).
• The location and size of any Hob-upstand (if applicable).
• The location of any cooktops or stoves and what type they are ( drop in, free standing, slide in)
• Is Templating & Fitting required or not.

---

---