The RC Series cable reeling machine has been developed to give maximum versatility and ease of use in a coiling environment. It comes with easy to use features that help the operator to carry out reeling onto a drum or coiling, using the coiling head with a minimum of manual effort. All controls are locally placed to the operator and simple to use. Care and attention has been made to make the RC series machine as safe as possible to use but correct procedures must be observed at all times.

RC500

The RC500 is a hand-coiling machine capable of coiling cable, rope or similar materials onto either 500mm drums or into small coils. It comes with an accurate traversing measuring machine which feeds the material onto the drum, which is rotated by hand via a handle.

Capacity - 35Kgs (Manual lifting guideline)on plywood drum
Meter Type - Medium Duty meter
Layering - Manual via traversing arm
Coiling - Slide on coiling head with fixed diameter
Drum Shaft - Fixed with adapter collars
Load wheel - Nylon Locking fixed
Steer wheel - Nylon swivel castor locking
Stability - Locking castors
Drive system - Manual crank handle
Tuition - On site following delivery
Condition - New
Dimensions - Height 140cm, Width including handle125cm, Length 157cm.
Warranty - 12 months parts and labour subject to signing a service contract.

The RC1000 is a powered coiling machine cabable of loading 1000mm diameter drums. Its controls are simple to use, the machine is started by pressing a button located near the measuring machine, rotation speed is variable and controled from the control panel.

RC1000 Features:

Up to 1000mm diameter drums.
Manual Hydraulic lift.
Forward only with variable speed control.
1.5Kw motor - 230V 16A supply required.
Manual slide traverse.
Measuring Meter.
Floor locks.
Emergency Stop button.
Optional Coiling Head.
Optional Storage Boxes.
Optional manual cutting device.
Dimensions - Height 135cm, Width 160cm, Length 175cm.

The RC1200 is a powered coiling machine cabable of loading 1200mm diameter drums. Its controls are simple to use, the machine is started by pressing a button located near the measuring machine, direction of rotation and speed which is variable is controled from the control panel.

RC1200 Features:

Up to 1200mm diameter drums.
Load capacity of 1000Kg.
Manual Hydraulic lift.
Forward only with variable speed control.
1.5Kw motor - 230V 16A supply required.
Manual slide traverse.
MM80 Measuring Meter.
Floor locks.
Standard drum shaft.
Standard Coiling Head.
Optional Storage Boxes.
Optional manual cutting device.
Inverter internally isolated for safety.
Emergency stop button.
Dimensions - Height 144cm, Width 175cm, Length 202cm.

Collapsable Coiling Head

The collapsable coiling head is provided with both the RC1000 and RC1200 standard machines and is interchangable with the standard drum shaft provided.
After the user has the correct length of cable/rope/hose on the coiling head, it can then be strapped. The coiling head can then be collapsed by releasing the toggle clamp and folding the outer-side inwards. The prepared coil then can be simply removed.