Designed for the most rigorous use by fire fighters world-wide being light in weight and rugged in construction. The Tunic Jacket is designed on the layer principle to give a high degree of protection. The outer layer is Nomex ®, coated with a waterproof barrier, with an inner lining of flame resistant cotton.
Colour: Black as standard, Orange, Navy Blue and Yellow also available
Outer shell: Nomex® III 7.5 oz per sq yard, plain weave coated with neoprene
Inner lining: Lightweight Proban cotton
Thread: Nomex ®, natural
Seams: Top stitched external seams
Sealing: Outer layer sealed with hot melt tape.
Collar: High, reinforced collar with corduroy lining, closure tab with press stud fastening
Body: Off the shoulder sleeves.
Sleeves: One piece with knitted fire resistant storm cuffs
Closure: Zip with Velcro flap over.
Pockets: Two thigh pockets with open lower corners and flaps over touch and close
Retro-reflective tape: Fitted around chest, hem and both sleeves, colour white 50 mm wide.
PCFFTNMXYW: Nomex ® III Tunic Jacket Overtrousers.
Same construction as above plus:
Colour: Yellow
Braces: 38 mm webbing bracers with two plastic adjusters.
Fly: Inner press stud closure with deep flap over.
Retro-reflective tape: Fitted around lower leg, colour white 50 mm wide fire resistant grade
Designed for the most rigorous use by fire fighters world wide, being light in weight and rugged in construction. The garment is designed on the layer principle to give a high degree of protection. The outer layer is Nomex®, backed by the waterproof barrier, and finally the inner lining.
Colour: Black as standard, Orange, Navy Blue and Yellow also available
Sizes: Small, medium and large.
Outer shell: Nomex® III, 7.5 oz per sq yard, plain weave.
Waterproof barrier: Fire resistant neoprene/polyester.
Inner lining: 100 % wool
Thread: Nomex®, natural
Seams: Double stitched external seams
Collar: High, reinforced collar with corduroy lining, closure tab with press stud fastening.
Body: Double reinforced shoulders, inset sleeves with underarm gusset for additional freedom of movement.
Sleeves: Two piece with knitted fire resistant storm cuffs.
Closure: Inner press stud closure with metal hook and "D" ring over outer flap.
Pockets: Two thigh pockets with open lower corners and flaps over touch and close, two internal pockets.
Retro reflective tape: Fitted around chest, hem and both sleeves, colour white 50 mm wide.
PCBJTNMXYL Nomex® III Bunker Jacket Trousers
Braces: 38 mm webbing bracers with two plastic adjusters
Closure: Inner press stud closure with deep flap over
Retro reflective tape: Fitted around lower leg, Colour white 50 mm wide fire resistant grade.
Including breatheable Tritec Laniere moisture barrier, non-woven aramid wadding thermal barrier and quilted viscose inner lining.
Outer shell fabric Kermel Ripstop Technora. Nomex® Delta T and Nomex® III also available
Colour: Navy,
Reflective tapes: 1 band 40mm Scotchlight (silver) around chest, bottom hem and each wrist
Pockets: 2 outer patch pockets with velcro fastening flaps, and drainage holes (optional)
1 inner patch pocket at lower right hand front of lining
2 side slit pockets between front zip and flap
Badge: Fire Rescue' Stencil reflective badge at the centre back.
PCFFTRENKML Firemans Overtrousers manufactured to EN469. including breatheable Tritec Laniere moisture barrier, non-woven aramid wadding thermal barrier and quilted viscose inner lining.
Outer shell fabric Kermel Ripstop Technora. Nomex® Delta T and Nomex® III also available
Two way centre front zip. Velcro fastening front flap. Internal knitted cuffs. One band of 40mm Scotchlite around chest including front flat. One band of 40mm Scotchlite around each wrist and ankle.
PCFFCVENKML Firemans Fire Fighting Coverall manufactured to EN469. including breatheable Tritec Laniere moisture barrier, non-woven aramid wadding thermal barrier and quilted viscose inner lining.
Outer shell fabric Kermel Ripstop Technora. Nomex® Delta T and Nomex® III also available
Elasticated waist. Elasticated cross over braces with Triglide adjustments. Plain ankles. One band of 40mm Scotchlite around each ankle.
THE ARDENOAK FIREMAN’S HELMET CE MARKED
CERTIFIED TO EN 443
The Helmet shell is manufactured from glass fibre which has excellent impact qualities and is comfortable to wear.
The Helmet is a universal size to fit all head sizes with an adjustable head band and chin strap.
Standard colours available are yellow and white and the Helmet is easily stored by a D-ring fixed to the rear of the Helmet.
A 3mm thick and 110mm deep polycarbonate visor or 150mm full face visor as well as a neck curtain are optional extras.
The Helmet is fully compatible with breathing apparatus
The steel toecap is to 200 joules with an external rubber anti-scuff toecap: a steel mid-sole to prevent nail penetration and a shock absorbent sole which is resistant to attack by oils and acids and which has good heat resistance. Available in full sizes 5-12
The Ardenoak range also includes a vulcanised rubber Fireman's knee boot (not illustrated) with cushioned inner soles and pull on loops.
