Exceptional abrasion resistance
Completely rot-proof
Easily repaired in the event of accidental damage
|
Exceptional abrasion resistance |
|
Completely rot-proof |
|
Easily repaired in the event of accidental damage |
|
Short length burst pressure 500 psi/35 kg/cm² |
Anglo Hoses are manufactured from the toughest, yet lightest and most flexible, man-made synthetic yarns available. They are circular woven on the most modern looms into tough fire hose jackets, every inch of which is subjected to rigorous inspection.
A seamless tube of black synthetic rubber is then steam vulcanised into the jacket to produce one of the most robust, light-weight, flexible hoses available.
Anglo fire delivery hoses are also available with a specially formulated red polyurethane external coating, suitable for all climatic conditions, which gives increased resistance to heat and excellent external protection against oils, most acids, alkalis and a wide range of chemicals.
|
Tested
and accepted for marine use by the Department of Transport Marine Directorate |
|
Exceptional
abrasion resistance |
|
Completely
rot-proof |
|
Easily
repaired in the event of accidental damage |
|
Short
length burst pressure 650 psi/45 kg/cm² |
|
Maximum
advised working pressure 300 psi/21 kg/cm² |
|
Manufacturer's
proof pressure 400 psi/28 kg/cm² |
Britannia Hoses are manufactured from the toughest, yet lightest and most flexible, man-made synthetic yarns available. They are circular woven on the most modern looms into tough fire hose jackets, every inch of which is subjected to rigorous inspection.
A seamless tube of black synthetic rubber is then steam vulcanised into the jacket to produce one of the most robust, light-weight, flexible hoses available.
Britannia fire delivery hoses are also available with a specially formulated red polyurethane external coating, suitable for all climatic conditions, which gives increased resistance to heat and excellent external protection against oils, most acids, alkalis and a wide range of chemicals.
|
|
1½" |
1¾" |
2" |
2½" |
2¾" |
3" |
|
lb/100ft |
19.2 |
21.9 |
25.5 |
30.5 |
35.4 |
41.2 |
|
15 meters |
23 meters |
30 meters |
|
50 feet |
75 feet |
100 feet |
|
12½" |
14½" |
17½" |
| Manufactured
and independently tested to BS 6391:1983 Type 3 |
| Tested and accepted for marine use by the Department of Transport Marine
Directorate |
| Exceptional abrasion resistance |
| Completely rot-proof |
| Easily repaired in the event of accidental damage |
| Average short length burst pressure 750 psi/50 kg/cm² |
| Manufacturer's proof pressure 450 psi/30 kg/cm² |
| Maximum advised working pressure 300 psi/21 kg/cm² |
The quality range of Tuffline hoses give superb resistance to abrasion and attack from many oils, greases, petrols and chemicals.
A fully synthetic textile layer is sandwiched between a synthetic rubber lining and cover to give added strength and durability. The adhesion between layers compares favourably with all other types of covered fire hoses.
|
|
1½" |
1¾" |
2" |
2½" |
2¾" |
3" |
|
lb/100ft |
20.8 |
22.5 |
28.1 |
33.3 |
39.1 |
45.6 |
|
15 meters |
23 meters |
30 meters |
|
50 feet |
75 feet |
100 feet |
|
14" |
18" |
19" |
Please also refer to our other pages for details of fire brigade couplings and fittings in Gunmetal and Light Alloy.
In the interest of product improvement we reserve the right to amend this specification without prior notice