Berlingo
/ Partner
FITTING-GUIDE PAGE - 3
FRONT
DOORS
Click
on any picture to enlarge!
STEP 7
Now
remove the rubber window strip as shown in the photo's
shown below
STEP 8
Now
you need to remove the door-lock retaining clip by
dislodging it with a screwdriver. Please note that this
will not be replaced when re-assembling.
With
the retaining clip removed, you can now withdraw the
actual door lock mechanism.....
STEP 9
Placing
the zinc-coated plate over the door-lock hole as shown
in the photograph and mark the door for drilling.
Please
note that because the door is double-skinned, you will need
to drill a pilot-hole before using your larger drill-bit
Once
you have completed the drilling, protect the area by
applying a small amount of touch-up paint to the drill
holes..
Click
on any picture to enlarge!
