|
FITTING
GUIDES
Relay
Front Doors
Rear Doors
Side Doors
|
RELAY/Boxer/Ducato
FITTING-GUIDE PAGE - 2
FRONT
DOORS
|
|
 |
|
 Click
on any picture to enlarge!
STEP 4
|
|
The
first task is to remove the door trim and handles. This
involves undoing a number of screws as depicted in the
photos. Be sure to store the screws safely for
refitting later.
 |
|
Disconnect
the speaker cable and pull the trim off.
|
|
|
If your
vehicle has central locking, never leave
your keys in the van whilst installing Armaplate. You
may accidentally activate the locking mechanism with
your keys inside. |
|
|
|
| STEP 5 |
|
With
the door trim removed, use the tack-remover to withdraw
the female trim-plugs from the door and fit them
to the male trim-plugs on the back of the door
trim. They fit on with a "push & twist"
action.
|
|
|
STEP 6
|
| Using
a sharp blade, carefully cut back a section of
the upper foam seal to gain access to the inner
door.
Then
remove the bolt shown in the picture above.
Go
To Next Page
|
| |
