• All and any data that is considered useful to Structural Steelwork Designers will be featured here.

• Much of the data provided will be of universal appeal, but where the information is related to building standards the UK Standard BS5950, Pt1, 2000, will provide the basis for interpretation unless otherwise stated.

• Examples showing the use of the various elements of data are or will be provided.

• Worked design examples are now being added. (Under continuous development).

The following, Useful Data, is supplied free of charge to registered users for their use only. The Data shall not be resold, but may be passed on, on condition that all subsequent users also registered with CADOSS.  Ownership of the Data belongs to CADOSS and copyright shall remain with CADOSS unless expressly stated otherwise. This Data is provided in good faith and no liability can be accepted for errors or misinterpretation of the data. While every reasonable care has been taken in the preparation of the Data provided it remains conditional that the user of the Data satisfy themselves as to the accuracy of any Data used. It is also required that all production work carried out using CADOSS products is independently checked by appropriately qualified engineers. The settling of any ambiguities in the interpretation of these terms and conditions rests with CADOSS, and their interpretation shall remain final. You must accept the above conditions, and any further conditions shipped with particular items of Data, before you use any of the following Data. If you do not accept the terms and conditions you should not use the Data.

Register Name, Address & Email Address here: - Register