Tools


Swann Morton Scalpel Blades
Carbon steel, 4 different shapes, each in packs of 5. Very useful for cutting veneers, Lute roses and other fine work.
TL900 No 10 0.90
TL901 No 10A - OUT OF STOCK 0.90
TL902 No 11 0.90
TL903 No 15 0.90
TL904 No 3 handle - fits any of the above blades 3.80


Swann Morton 'Supatool' Blades
For general craft work.
TL906 S 0.50
TL907 T 0.50
TL908 V 0.50
TL909 W 0.50
TL910 'SUPATOOL' handle - heavy duty secure housing for any of the Super Sharp blades listed above 2.90


Luthiers' Knives
Finest steel, hardened along full length. Supplied without handle.
TL913 6mm wide 27.95
TL914 10mm wide 31.80
TL915 15mm wide 34.30


Chisels
TL918 1mm chisel, highly recommended for picking out purfling slots 18.50
TL919 2mm chisel, highly recommended for picking out purfling slots, also ideal for bridge saddle slots 16.20
TL920 Octagonal wooden handle for TL918 & TL919 2.75


Purfling Cutters
TL922 'IBEX' PURFLING CUTTER Brass with Cherry wood handle and 2 cutters.
Well made and excellent value for money.
55.00


'Ibex' Thumb Planes
Precision miniature planes with a slightly convex bottom surface. For use on Archtop Jazz Guitar fronts and backs, etc.
TL926 Length 25mm Blade width 8mm 52.80
TL927 Length 36mm Blade width 12mm 57.20
TL928 Length 46mm Blade width 18mm 66.00


Toothed Blades for 'Ibex' Thumb Planes
TL930 Blade width 8mm 9.10
TL931 Blade width 12mm 9.10
TL932 Blade width 18mm 9.10


Circle Cutter
TL940 With centre drill bit and brad point 7.25


Nut Files
Precision made, superb quality. A wider slot can be made by turning each file and dressing the edge of the slot as well
TL948 Set of 3 double-edged nut files (giving a total of 6 gauges) Each side is numbered and the following gauges apply: #1 = .016" #2 = .028" #3 = .040" #4 = .048" #5 = .054" #6 = .062" currently unavailable


Fret Files
With 'Cut' on 2 edges. Supplied with handle
TL960 Medium gauge 30.80
TL961 Large gauge 30.80


"3-in-1" Fretfile
TL962 Cleverly designed offset handle holds inter-changeable "Burrs". Supplied with fine, medium and large gauge "Burrs" 46.00
TL967 Spare 'Burrs'for "3-in-1" Fretfile, Fine Gauge 9.00
TL968 Spare 'Burrs' for "3-in-1" Fretfile, Medium Gauge 9.45
TL969 Spare 'Burrs'for "3-in-1" Fretfile, Large Gauge 9.90


Fret Slot Saw
TL970 Stiff backed with wooden handle. Dressed for fret tang width 16.70


Jewellers Piercing Saw Frame
TL972 Essential for cutting and shaping thin materials e.g. bone, veneer, M.o.P, metal and wood 20.80
TL974 No 8 blade, for the above, coarse 3.20
TL975 No 2 blade, for the above, medium 4.20
TL976 No 2/0 blade, for the above, fine 4.45


Fret Cutting Nippers - O/S
TL980 Flush cutting, for fret ends - out of stock until further notice, sorry for any inconvenience caused. 10.40


Fret Tang Nippers
TL981 Undercuts fret tang. Ideal for bound f/boards 69.30
TL982 As above, for jumbo fretwires 69.30


'Ibex' Bending Iron
TL984 Cast aluminium ovoid shaped tube for heat bending guitar, violin and viola sides, with thermostat control (can be clamped for either upright or horizontal use). Please note; although correct UK voltage, this product comes supplied with U.S.A 2-pin plug. 195.00


Reamers
TL990 Lute/Violin peg hole. 1:30 taper 55.00
TL991 Bridge pin hole. Tapers from 3mm to 12mm over 90mm length 4.60


Lute/Violin/Viola Peg Shaver
TL992 Heavy duty aluminium and steel. Works like a pencil sharpener 51.40




Lightweight Aluminium Long Reach Bridge Clamp
TL994 6" throat depth, 2" clamping depth 28.00


Thicknessing Calipers
TL995 Top quality die-cast frame, 320mm throat. 198.00


Toolu's Radius Blocks
High quality, double sided blocks, made from responsibly sourced steamed beech hardwood, manufactured in the UK.
TL996A Block 'A' measures 7.25" on one side & 9.5" on the other side. 26.40
TL996B Block 'B' measures 10" on one side & 12" on the other side. 26.40
TL996C Block 'C' measures 14" on one side & 16" on the other side. 26.40
Home About Us Catalogue