The geared central motor operates a side-wall scraper: it has variable speed and the sprung blades are manufactured from Teflon.

There is a standard high speed stirrer with twin propeller and a further 1.1kWatt motor fitted with a high shear emulsifying head. All 3 motors can be programmed to adjust ramp up and ramp down speeds and have their exact speeds shown on the display panel.

A combined pH/mV/temperature probe is incorporated, with the probe seated in a removable stainless 'finger', complete with mesh end. It has been calibrated to measure temperatures normally in the range 0-100ºC as well as mV and pH measurements over the entire range 0-14. There is a USB terminal for computerised recording and programming which can then control stirrer speeds etc.

The pipework is designed for easily dismantling and simple cleaning after production. Silicon seals are incorporated between the joints and the electrical components are all manufactured to be waterproof and easy to replace.

The whole unit is built to the highest specifications from 316 (inner vessel) and 304 grade stainless steel. Magnetic safety door locks ensure that all stirrer motors stop instantly as soon as entry flaps are opened and there is an emergency stop button fitted.
A similar vessel to this could be manufactured in 4-6 weeks.