About Us
Ancillaries
Bespoke
Centrifugal Pumps
Contact Us
Customers
Filters
Gauges
General Service
High Pressure Blowers
Home
KF Flanges
Liquid Ring
Mechanical Boosters
Peristaltic
Pressure
Vacuum
CDS Pump Specifications
DEX Pump Specifications
F Pump Specification
MEX LEX Specification
F 300 F 310 F 360 F 400
F 410 F 500 F 510 F 600
F 610 F 700 F 710 COMPARE ALL

Text Box: The F range of pumps are volumetric single stage pumps for medium and high capacity.  
Pumping Speeds from 2500 to 30,000 cubic meters per hour, and pressures down to 180mbar can be obtained.
Text Box: Pumping Curves
Text Box: Given capacity values are for dry air at the 20°C, atmospheric pressure s taken to be 1013 mbar, service liquid used is water at 15°C.  Alterations can occur when working conditions change.  For instance, changes of the physical properties of the pumped gas or service liquid (vapour pressure, temperature, specific gravity, viscosity), combination among different types of gas and vapours are factors which might determine heavy impacts on the nominal capacity.  Pumps in AISI 316 execution are 10% less performing compared to the curve capacity values.  Selected motor power is based on the standard operating conditions.  In case of a higher power demand, it is possible to install the next motor size.  In order to achieve a deeper vacuum, a gas ejector can be installed ahead of the pump; it operates by taking advantage of the pressure difference created by the pump with no need of a high energy motive fluid.  The maximum suction pressure which can be reached is about 10 mbar.  The ejector should be used below 40 mbar.
Text Box: With Reference to the Pumping Curves

About Us ] Ancillaries ] Bespoke ] Centrifugal Pumps ] Contact Us ] Customers ] Filters ] Gauges ] General Service ] High Pressure Blowers ] Home ] KF Flanges ] Liquid Ring ] Mechanical Boosters ] Peristaltic ] Pressure ] Vacuum ] CDS Pump Specifications ] DEX Pump Specifications ] [ F Pump Specification ] MEX LEX Specification ]