Text Box: [Vacuum Home]  [Gauges]  [Liquid Ring]  [KF Flanges]  [Filters]  [Mechanical Boosters]

About Us
Ancillaries
Bespoke
Centrifugal Pumps
Contact Us
Customers
Filters
Gauges
General Service
High Pressure Blowers
Home
KF Flanges
Liquid Ring
Mechanical Boosters
Peristaltic
Pressure
Vacuum
CDS Pump Specifications
DEX Pump Specifications
F Pump Specification
MEX LEX Specification		 Text Box: DEX Range Pumping Speeds from 400 - 1950 Cubic Meters Per Hour More Information On DEX Range Text Box: MEX / LEX Liquid Ring vacuum pumps are single stage vary port type pumps designed for high vacuum.  These pumps offer simplicity and robustness and can be used on a wide variety of applications.  They have the ability to handle almost any type of gas vapour combination even corrosive substances because these pumps can be constructed with various exotic materials to suit the application Text Box: MEX and LEX Range Pumps Covering 25 - 450 Cubic Meters Per Hour More Information On MEX LEX

Text Box: The DEX range of pump is a single stage pump with vary port design.  These pumps offer simplicity and robustness and can be used on a wide variety of applications.  They have the ability to handle almost any type of gas vapour combination even corrosive substances because these pumps can be constructed with various exotic materials to suit the application.  This range of pumps is very similar to the LEX and MEX but it offers greater pumping capacity. The service liquid must be continuously fed to the pump in order to remove the heat generated from compression and to maintain the liquid ring as part of it is ejected with the gas under normal running conditions.  The service liquid may be separated from the gas by means of a discharge separator and re-circulated if no loss of pumping fluid is required, be it for cost or environmental purposes Text Box: CDS Range Pumping Speeds from 10 - 3800 Cubic Meters Per Hour More Information On CDS Range

Text Box: F Pumps are volumetric single stage pumps for medium vacuum levels with high capacity.  As the only moving part is the impellor shaft assembly these pumps are very reliable and robust.  The sealing fluid also absorbs the heat induced by compression of the gases, keeping the pump temperature consistent and maintaining isothermal compression.  This type of pump has many applications for example, they are used in paper mills, power stations, vacuum distillation, steel degassing, mining, sugar plants, centralised systems, and may more. Text Box: CDS liquid ring vacuum pump range is a two stage type design, with simplicity and robustness being key, they are suitable for a wide range of applications.   They are of high reliability, and can be constructed from various exotic materials to handle the more corrosive environments, and any gas/vapour. The service liquid must be continuously fed to the pump in order to remove the heat generated from compression and to maintain the liquid ring as part of it is ejected with the gas under normal running conditions.  The service liquid may be separated from the gas by means of a discharge separator and re-circulated if no loss of pumping fluid is required, be it for cost or environmental purposes Text Box: F Range Pumping Speeds From 2,500 - 30,000 Cubic Meters Per Hour More Information On F Range of Pumps [ About Us ] [ Ancillaries ] [ Bespoke ] [ Centrifugal Pumps ] [ Contact Us ] [ Customers ] [ Filters ] [ Gauges ] [ General Service ] [ High Pressure Blowers ] [ Home ] [ KF Flanges ] [ Liquid Ring ] [ Mechanical Boosters ] [ Peristaltic ] [ Pressure ] [ Vacuum ] [ CDS Pump Specifications ] [ DEX Pump Specifications ] [ F Pump Specification ] [ MEX LEX Specification ]