HolloWrap Ltd at the International Converting Exhibition.
Click each thumbnail for a PDF specification sheet.
For further details contact sales on +44 116 2760206
Email- Sales@hollowrap.com
These compact surface drive machines are primarily designed for the
conversion of cling and stretch films. They can also be used for processing
other flexible films.
A machine for the rapid conversion of stretch and cling films. The modular
construction offers maximum flexibility allowing one machine to be supplied in
different forms.
HSA600-2 High Speed Automatic Rewind
An automatic surface driven machine for the rapid conversion of stretch
and cling films.
Roll
Collation System. The
HSA 600-2 Automatic rewind machines can be laid out into a working cell with
one operator minding the rewind machines, changing master rolls and filling the
core hoppers. The finished rolls exit from the back of the machines onto a
common conveyor and are conveyed to a end flight conveyor where they can either
be manually packed or go to an automatic box erection / roll loading station.
HSA 600- Stand-a-lone
automatic roll collation system
An alternative to our three up collation
system. The machine automatically
fills up each of the shelves, with a capacity of 50 off 150mm diameter rolls.
When all of the shelves are full the rewind machine automatically stops and a
beacon or siren indicates to the operator that the stacks are full.
A machine based around the popular MkV Rewind
Slitter for the perforation of food grade films.
A machine primarily designed for the rapid conversion of PVC and PE
cling films. The machine can also process a range of LDPE stretch films and low
tack adhesive tapes.
Based around
popular MkV Prestretch rewind, fitted with accurate
servo prestretch control with 3 roller stretcher train geared to give a maximum 250% stretch.
MkVS1
1m Wide Servo Pre-Stretch Semi-Automatic Rewinding Machine
1 Metre wide MKV base frame with 3
roller stretcher train geared to give a maximum 250% Stretch
Servo
driven master roll to vary tension along with the AC stretcher chain drive.
RCP1600 Rewind cross perforator.
A Machine that has
been primarily designed to slit and perforate bubble film, although it is also
suitable for many other materials such as wrap films and foams.
The machine unwinds the material, slits it to the desired widths, cross
perforates it to the preset pitch distance and rewinds it on to its new core .
The core cutter has been designed to
automatically feed, process and cut cardboard or plastic cores, 1000mm in
length.
Automatic Core Notching
Machine
An automatic machine designed to cut a slot in
the end of TTR (thermal transfer ribbon) cores.
A small portable unit to wind scrap trim from
extrusion lines or slitting processes for recycling.
A competitively priced compact unit
for the slicing of various foils and adhesive tapes.
A centre driven machine for the
conversion of a wide range of films that cannot traditionally be surface
driven.
Site search