We also supply great cables and connectors from Viablue in Germany. Call or e-mail us with your requirements. 
The Products
We have talked extensively about our range of speakers elsewhere in these web pages and the links to the models are shown on the left of this page. So here we will tell you a bit about Viablue products which we sell in the UK. We are fortunate to be able to offer the full range of Viablue cables, interconnects isolation solutions and accessories. Below you will read a little about some of the products but we can supply anything from their entire range just drop us an e-mail with your requirements and we can give you a competitive quote.
Definition. Details. Living music.
High-End quality. Salient Design. ViaBlue™ Cobra.
ViaBlue™ SC-2 Silver Series loudspeaker cables have a combination of silvered braids for the high pass range and tinned braids for the full rendition of the low pass. Terminated with ViaBlue™ T6s Series loudspeaker plug-in connections plated with genuine gold.
SC-2 speaker cables have a transparent and three-dimensional acoustics and a brilliant, airy quality in the high range. Clean lows and basses homogeneously round out the acoustic pattern. Technically, all of the frequency ranges are cleanly and realistically represented and reproduced in a linear fashion.
Different materials for different ranges.
Both 4 mm2 leads of the SC-2 speaker cable consist of seven-stranded lays with a total of 448 individual wire conductors. In order to customize the sound range for the individual frequency ranges, five strands have genuine silver plating for accurate reproduction of the high range and two strands have pure copper strands for powerful accentuation of the bass.
The SC-2 speaker cables have ViaBlue™ Cobra sleeve around.
Silver plating for more brilliance.
Through the combination of silver-plated and tin-plated leads, the finest details and brilliance of the treble range as well as the lower frequency signals of the bass range are fully carried and powerfully reproduced through the attached speakers.
The splitters typically used with ViaBlue™ cables protect the cable ends from snapping off and, at the same time, provide a professional, well thought out cable routing of the single leads.
ViaBlue™ NF-S1 XLR and NF-S1 RCA interconnects yield music with faithful reproduction at all frequencies. The sound is completely linear and undistorted. The silver-plating of both screens makes it possible to perceive even the most subtle musical variations in the high-frequency range with hi-fidelity. The goal is to play back music the same way it was recorded - with no distortions. NF-S1 performs this task exceptionally well.
Both NF-S1 and NF-S1 interconnects are available as mono and stereo cables . The function is identical. With the mono version you get one pair of two single cables. The stereo version has the two single cables in one sleeving so it's more comfortable to handle when you got many cables.
Shielded. Quadruple.
The balanced construction of the NF-S1 XLR has two inner tin-plated 0.5 mm2 copper wires with 19 individual strands (19 x 0.185 mm) and polyethylene insulation. Two twisted PVC insulators are used as fillers. The Quattro Silver Shield multiple screening has two ALU-PETP films and two silver-plated spiral wrap screens running in opposite directions with fine 0.15 mm strands. There is a felt layer between the screen and the outer cladding to protect the outer silver screen. NF-S1 has an outside diameter of 8 mm
Absorption and a noble design.
Eliminating of vibrations.
ViaBlue™ QTC Spikes receive vibrations from vibrating bodies such as speakers and transformers and reduces them. Maximum pressure builds up at connection point between vibrating bodies and their bases, using a high mass concentrated on three minimum points (peaks), The vibrations are eliminated through the extreme pressure points. This leads to vibration absorption.
Function mode.
Through the vibration reception disk, vibrations are received on the rotary plate with adjustable height. The vibrations gathered in the main cone are deflected. Excess pressure builds up and is transferred to the especially hardened points. On the equally identically hardened absorption master disk, a maximum pressure point is then created. The vibrations are eliminated.
Structure and construction.
ViaBlue™ QTC spikes are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a QTC spike is 30 mm. The initial height is 34 mm. The principal height adjustment may extend the initial height by another 5 mm. A second height adjustment can be achieved by shifting the peak and the threaded rod. As a rule, the principal height adjustment between the rotary disk and main cone is sufficient.
32 parts. Highest precision.
A total of 4 spikes per set are included in the delivery. A spike consists of: a grounding component with attached master disk, steel-hardened peak, main cone, rotary disk of adjustable height with attached vibration reception disk, M6 threaded rod and an M6 drive-in nut.
With the M6 thread stick included, the QTC spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the QTC spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)
Spikes are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass acoustics are not transferred to furnishings and buildings but can develop freely in the room.
Efficient dismantling of oscillations.
Reducing of vibrations.
ViaBlue™ TRI absorbers receive vibrations from vibrating bodies like speakers and transformers and reduces them. Through a high pressure concentrated on three minimum points (peaks), maximum pressure is built up as a connection point between vibrating bodies and their base. Through the extreme pressure points, the vibrations are eliminated. This leads to vibration absorption.
The functional principle of the TRI Absorber is broken down into three task areas: 1.) reception of vibrations, 2.) concentration of the vibrations received/gathered on three pressure points, 3.) deflection of the absorbed vibrations on the base.
Vibrations are received through the vibration reception disk. The vibrations, gathered on three especially hardened spikes (peaks), are transferred via the integrated master disk. The excess pressure creates a maximum of three pressure points. The vibrations are eliminated.
In this way, the vibrations of speakers and devices are not transmitted to furnishings and buildings and do not cause any static noise.
ViaBlue™ TRI Absorbers are manufactured from brass. The components subject to pressure (master disk, peak) are hardened with steel. The circumference at the widest point of a TRI absorber is 30 mm. The initial height is 15 mm. The principal height adjustment may extend or shorten the initial height by another 1 mm.
A total of 4 absorbers per set are included in delivery. An absorber consists of: a threaded grounding component, a rotary disk of adjustable height, three steel-hardened spikes (peaks), and a hardened master disk incorporated in a vibration reception disk.
Absorbers are used, for example, for acoustic decoupling of the speaker cases from the base. In this way, feedback is avoided. Clean acoustics from the speaker are thereby ensured. The bass is not transferred to furnishings and buildings but can develop freely in the room.
Compactly. On the point.
ViaBlue™ HS Spikes.
The vibrations are absorbed through the high pressure point achieved, where the maximum weight (speakers, devices) is concentrated on a minimum point (point of the spike). Most notably, the bass acoustics sound clearer, cleaner and more distinct. Thus, the bass is not transmitted to the furnishings and buildings, but can develop freely in the room.
Each HS Spike consists of a total of 4 components: the main absorber cone, a base plate, the M6 to M6 thread stick and an M6 drive-in nut. Not only are the acoustics more distinct, but visually the HS spikes are an eye-catcher. Material/ ground: brass, black-chrome, Ø = 0.70 inch, M6 threads, loads of at least 50 kg per set (4 spikes per box)
With the M6 to M6 thread stick included, the HS spikes can be tightly connected with speakers or devices. This ensures a steady state and the best possible connection of the absorption reducer to the vibrating . For speaker cases and devices with built-in M8 threads, special M6/M8 thread stick go from the HS spikes M6 thread to an M8 thread, also a M6 to 1/4"-20UNC is available. (detailed information about threads)
The three-part HS spikes are adjustable in height. The initial height is 1.5 inch. The maximum height adjustment recommended is 0.15 inch. The spikes are delivered with drive-in nuts.